Addressable Fire Alarm Control Panel

Product Details:

AVANI is a cost effective and intelligent addressable fire alarm control panel having an extensive list of powerful features. The panel has maximum capability for four loop cards, which are plugged into the main circuit board. Higher loop requirements can be catered to using the networking feature of the fire alarm control panel. There is an option for remote and local programming of the control panel using configuration software / Avani soft upload/download utility. All the PCB's are mounted over a stud and the power supply boards is secured by a separate metal box.

Features:

• Device / Detector wise configuration facility.
• 2000 Event Storage with Real Time Clock.
• Upto 192 grouping facility.
• Pre Alarm Action.
• All field wiring are power limited and supervised.
• Programmable detector sensitivity.
• Device type verification.
• Earth fault annunciation facility at 0 ohms.
• Double Address Sensing.
• Loop wise device test . 40 X 4 Characters LCD display 5 IDC Loops (4 Addressable and 1 Conventional loop).
• Maximum 4 numbers of loop card with Class A, Style 5,6 or 7 and Class B Style 4 wiring Maximum 254 devices (any combination) per loop.
• Day / Night Mode facility.
• USB 2.0 Interface for PC connectivity.
• RS 485 Communication facility for Network / Repeater Programmable Auto Silence Facility.
• Programmable AC Loss Delay.
• Programmable Silence Inhibit.
• Two programmable Inputs for Evacuate, Silence & Conventional Zone Battery low audio, visual warning.
• Three programmable Form C relay for Fire, Fault and Supervisory.
• Two no’s of Supervise Notification Appliance Circuits.

Special Features:

• Indian Manufacturer - International standard. UL Listed (9th Edition) Switched Mode Power Supply. Modular Construction, Serviceability.
• Networkable.
• Auto Resettable Fuse.
• Surge Protection.
• Battery polarity protection.
• 32 bit processor
• Unique protocol feature for fast alarm response.
• Inbuilt conventional circuit.
• Touch Keypad for user friendly operation.
• Auto learning facility.
• Multi protocol.
• Peer to Peer Networking.
• Redundancy : If the main CPU fails, it will raise an alarm like conventional panel.  

Product Details:

The RE-517RP repeater panel is a compact remote unit for Ravel-Avani Intelligent Analogue Addressable fire Alarm panel. This repeater is connected to Avani FACP using RS 485 communication network and repeats the panels information of the main panels connected in network. Any communication fault or any loss in communication due to cable fault is indicated in this repeater panel.

Special Features:

• Modular Construction, Serviceability.
• Repeats all indication / controls of main FACP.
• Networkable.
• User selectable display parameters.

Features:

• 32 bit processor.
• 160 (40 X 4) Characters LCD display.
• Touch Keypad for user friendly operation.
• Remote silence / Reset / Evacuate can be done from Repeater Panel.
• RS 485 Communication for Standalone / Network Repeater.
• 1000 Event storage with Real Time Clock.
• Battery low audio visual warning.
• One supervised Notification Appliance Circuits.
• One Form C relay for Common fire.
• USB 2.0 for PC Interface. 

 

Product Details:

Ravel MonitI-x addressable fire control panel with easy to configure, that deliver uncomplicated solutions for small and mid-sized applications with electronic soft addressing. An extensive range of compatible addressable systems ancillaries are available to work with the Moniti-x and all of which incorporate an integral short circuit isolator to provide maximum protection against short circuits on the external loop, these flexible systems offer versatility that benefits building owners and contractors alike.

Features:

• Switched Mode Power Supply.
• CE Approved.
• Modular Construction, Serviceability
• Surge Protection.
• Battery polarity and deep discharge protection.
• Unique protocol feature for fast alarm response.
• Keypad for user friendly operation.
• Auto learning facility.Operates on 120 to 220VAC, 60 / 50 Hz, 120W.
• Battery Backup 24V DC with built in charger.
• Keypad with alphanumeric keys.
• 40 x 4 characters LCD display.
• Loop card with Class A or Class B wiring.
• Maximum 147 Devices including 20 Loop Sounders
• Upto 192 Grouping Facility.
• Device / Detector wise configuration facility.
• 2000 Event with Real Time Clock.
• USB 2.0 Interface for PC connectivity.
• Two Programmable Form C potential free relays (Fire, Pre - Alarm & Supervisory).
• One Form C Potential free relay for Fault.
• 24V DC output.
• One Supervised Notification Appliance Circuit.(NAC)
• RS 485 Connectivity for repeater.

Product Details:

The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCDcharacter, 8 zones detection circuit,3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Special Features:

• Switched Mode Power Supply.
• Modular Construction
• Auto Resettable Fuse
• Surge Protection for all Input and outputs.
• Programmable AC loss delay/Trouble Remainder/Alarm Verification
• Battery polarity reversible protection
• Surface Mount Technology
• Over All current consumption is low.
• Fully complies with UL -864 and NFPA-72.
• Rugged CRCA sheet with powder coated finish.
• Operates on 110 – 220v 50 /60 Hz, AC Mains power supply.
• 16×2 Dot Matrix LCD Display.
• 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).
  • All zones accept smoke detectors and any normally open contact device.
  • Any Zone can be configured as Alarm or supervisory Zone.
• 2ClassBNotificationApplianceCircuits(NAC).
• NAC shall be programmed as silenceable or Non Silenceable.
• Supervisory Zone shall be Latching or Resettable.
• Standby (battery) backup 24v DC power supply with built in charger
• Error free Fire / Fault status in unambiguous colored LED indication.
• System ON indication.
• Main, Standby status audible and visual indication.
• Battery Low visual warning with audible tone.
• FormC relays for fire, fault and supervisory.
• Resettable / Steady 24V D.C. Output.
• RS 485 Communication facility (Optional).
• Lamp Test facility.
• All field wiring circuits are Power limited except 110 – 220v AC and Battery.
• All field wiring circuits are supervised.
• Walk Test facility.
• Zone Isolation facility with loop voltage cut off.
• Earth fault annunciation facility at 0 ohms.
• AC Low voltage cutoff.
• Programmable AC loss delay / Alarm verification / Trouble reminder.

Product Details:

The microprocessor based UL listed 4 Zone conventional fire alarm control panel, the system has 16 X 2 LCDcharacter,4 zones detection circuit,, 3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity,wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2554 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Special Features:

• Switched Mode Power Supply.
• Modular Construction
• Auto Resettable Fuse
• Surge Protection for all Input and outputs.
• Programmable AC loss delay/Trouble Remainder/Alarm Verification
• Battery polarity reversible protection
• Surface Mount Technology
• Over All current consumption is low.
• Fully complies with UL -864 and NFPA-72.
• Rugged CRCA sheet with powder coated finish.
• Operates on 110 – 220v 50 /60 Hz, AC Mains power supply.
• 16×2 Dot Matrix LCD Display.
• 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).
  • All zones accept smoke detectors and any normally open contact device.
  • Any Zone can be configured as Alarm or supervisory Zone.
• 2ClassBNotificationApplianceCircuits(NAC).
• NAC shall be programmed as silenceable or Non Silenceable.
• Supervisory Zone shall be Latching or Resettable.
• Standby (battery) backup 24v DC power supply with built in charger
• Error free Fire / Fault status in unambiguous colored LED indication.
• System ON indication.
• Main, Standby status audible and visual indication.
• Battery Low visual warning with audible tone.
• FormC relays for fire, fault and supervisory.
• Resettable / Steady 24V D.C. Output.
• RS 485 Communication facility (Optional).
• Lamp Test facility.
• All field wiring circuits are Power limited except 110 – 220v AC and Battery.
• All field wiring circuits are supervised.
• Walk Test facility.
• Zone Isolation facility with loop voltage cut off.
• Earth fault annunciation facility at 0 ohms.
• AC Low voltage cutoff.
• Programmable AC loss delay.
• Programmable Alarm verification.
• Programmable Trouble reminder.

Product Details:

RE-LC Loop Card for AVANI, intelligent addressable fire alarm control panel. Up to 254 devices can be connected to a single loop card. These loop card can plugged in to slot provided in the motherboard of Main panel (Avani). RE-LC Loop Card is compatible with Addressable Detectors, Manual Call Points, Modules etc., The status of the loop shown by dual colouor LED.

Features:

• Loop wise device test .
• Lloop card can programmable as Class A, Style 5,6 or 7 and Class B Style 4 wiring.
• Maximum 254 devices (any combination) per loop.
• Auto learning facility. 

 

Product Details:

Features:

• Complies EN54
• 160 (40X4) character LCD Display
• RS 485 communication for repeater
• One Programmable form C relay for fire
• Extensive built in transient protection
• Common fire, fault LED indication

Product Details:

The RE-517RP repeater panel is a compact remote unit for Ravel-Avani Intelligent Analogue Addressable fire Alarm panel. This repeater is an active repeater with full indication and controls of main FACP. This repeater is connected to Avani FACP using RS485 communication network. Any communication fault or any loss in communication due to cable fault is indicated in this repeater panel. The display parameters can be selected individually to suit the requirement of each remote area.

Features:

• 32 bit processor
• 160 (40X4) character LCD Display
• Event Storage with Real Time Clock
• RS 485 communication for Network / Repeater
• One Programmable form C relay for fire
• Extensive built in transient protection
• Lamp test facility
• Common fire, supervisory, fault LED indication

Product Details:

UL AND FM  approval 250 addresses for one loop or 2000 addresses for 8 loops. Green color screen. Zone indication and control panel for 32 zones gives a quick indication of the location of an alarm. Record capacity of 1000 historical events with date/time stamp. Integral power supply and battery. Integral printer. An standalone programmable conventional sounder circuit output. Flexible and intuitive cause and effect programming on front of panel. Output module manual start/stop facilitates the commissioning and operating. It supports the detector/module testing individually. USB port makes the load and save of configuration data or historical data convenient for system commissioning and maintenance.

Product Details:

The Microprocessor based UL Listed Agent release panel has dual function of detection and release of gaseous agent. The system has 16X2 LCD character, 4 zones detection circuit and 2main agent release circuits, it has various logic programmable options, the system has RTC facility, Auto & manual operational facility, solenoid output with ON and OFF timer with solenoid coil monitoring facility, programmable Main output facility, gas inhabit and instant release, manual release with time delay or without time delay and pressure low sensing facilities.Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE- 25AR will have all safety features to prevent accidental release, user friendly programmable options, the system is ideal choice to protect areas like, Server rooms, data centre, paint booths and hazards areas etc. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Special Features:

• Ravel Indian Manufacturer, International standard.
• Listed (9th Edition).
• Switch Mode Power Supply.
• Modular Construction, Serviceable.
• Special logic circuitory to prevent accident release.
• Auto Resettable Fuse.
• Surge Protected.
• Battery polarity & deep discharge
• NAC’s Output:
• Variable solenoid ON / OFF time.
• 4 No’s of programmable Initiating Device Circuit and 2 No’s of Releasing Agent circuit, with the independent correlation of any no of initiating devices circuit with any one of Release Agent Circuit.
• 4 No’s Programmable (Fire, Cross Zone & Gas Release) relays for integration of third party system
• Separate LED indications on front facia for individual Releasing Agent Circuit.
• 16×2 Dot Matrix LCD Display.
• Operates on 120-220v 60 / 50 Hz, AC Mains power supply.
• 4 Class B initiating device circuit (IDC).
• All zones accept smoke detectors and any normally open contact device.
• Any Zone can be configured as Alarm or supervisory Zone.
• 2 Class B Releasing Agent Circuits (RAC).
• 2 Class B Notification Appliance Circuits (NAC).
• Standby (battery) backup 24v DC power supply with built in charger
• Main, Standby status audio visual indication.
• Battery Low audio visual warning tone.
• 3 Form C programmable relays for Fire / fault / supervisory / Gas Released.
• Two modes of operations Auto / Manual.
• Programmable 24v D.C Outputs.
• RS 485 Communication facility (Optional).
• 200 Events history log with RTC.
• Walk Test facility.
• Zone Isolation facility with voltage cutt off.
• Earth fault annunciation facility.
• All field wiring circuits are Power limited except 220v AC and Battery.
• All field wiring circuits are supervised.
• AC Low voltage cutoff.
• Programmable RAC’s with count down timer.
• Programmable AC loss delay
• Programmable Trouble remainder.

Product Details:

The modbus convertor interfaces with Fire alarm control panel and end user device with RS232 / RS485 by modbus protocol. The modbus creates a hierarchical structure that is master & slave. the modbus protocol enables the master device to interrogate the slave devices. It has two types of interrogates, master & slave device with or without waiting for the slave response.

Features:

• CE Approved.
• Gives full status of all detectors, outputs and inputs of FACP.
• Two types of interrogation with Master & slave devices.
• Modbus output available as RS232 and RS485 interface.