Gas Detectors

Product Details:

RE-386LP conventional Propane gas (LPG) detector are suitable for use with conventional fire detection control panel as well as addressable fire detection control panel that can accept conventional type detectors via Zone Module. Advanced electronics in conjunction with a semiconductor gas sensor provides early detection of Propane gas (LPG).

Features:

Advanced algorithms provide advanced detection, discrimination. 

Stable gas sensing chamber. No adjustment or replacement required 

High immunity against unwanted alarms

Surface-mount device (SMD) circuit board design 

4-wire system operation

Detector auto-reset once gas levels fall below alarm threshold levels

Internal reed switch for hush and test functions

DC 24 V operation

N/O alarm relay output

70 dB internal sounder

Easy installation. No programming required

Connects to zone monitor for use with addressable control and indicating equipment

Sleek low-profile housing design

Low maintenance 

Product Details:

The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs.

A tri-color backlit LCD clearly indicates the unit’s status at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm.

All detectors are supplied pre-configured and include 2 programmable alarm relays, 1 programmable fault relay as well as an industry standard 4-20mA output (sink or source selectable) and MODBUS.

The scale, range, relay operation, alarm set point and electronic tag number of the detector can be adjusted using the transmitter's LCD and non-intrusive magnetic switches. Outputs are automatically inhibited during adjustment, thereby reducing the risk of false alarm at the control panel during maintenance.

Sensepoint XCD has an integral mounting plate for surface mounting or can be mounted to a horizontal or vertical pipe using the optional pipe mounting bracket. Electrical installation can be made using either conduit or cable with suitable mechanical protection. Two M20 or ¾”NPT entries are provided (depending on certification). A weatherproof cap is also included for use in the harshest outdoor conditions. Other optional accessories include a sunshade/deluge protection, duct mounting kit, collecting cone and remote mounting sensor socket.

Sensepoint XCD ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using easy to replace plug-in sensors, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors, poison immune infrared Hydrocarbon sensors and patented Surecell™ toxic sensors.


There are three different types of the XCD transmitter for use with three different families of sensors. The mV type transmitter is for use with the mV family of XCD sensors including catalytic sensors to detect flammable gases in the range 0-100%LEL and infrared (IR) sensors for detection of Hydrocarbon gases in the range 0-100%LEL and 0-100%Vol*, as well as Carbon Dioxide (CO2 ) in the range 0-2%Vol. The EC type transmitter is for use with the EC family of XCD sensors including Carbon Monoxide (CO), Hydrogen Sulfide, (H2 S) and Hydrogen (H2 ). The Oxygen transmitter is for use with the Oxygen (O2 ) XCD sensors. A transmitter can auto-recognize any sensor from within its sensor family. The sensor simply plugs into the bottom of the transmitter and the transmitter automatically configures itself accordingly 

  

Product Details:

RE-386CO Conventional gas (CO) detector is one of the most advanced design used to detect toxic carbon monoxide gas, engineered with electrochemical sensor. RE-386CO conventional gas (CO) detector are suitable for use with conventional fire detection control panel as well as addressable fire detection control panel that can accept conventional type detectors through Zone Module. Advanced electronics in conjunction with a semiconductor gas sensor provides early detection of carbon monoxide (CO).

Features:

• Advanced algorithms provide advanced detection, discrimination. 
• Stable gas sensing chamber ( No adjustment or replacement required).
• High immunity against unwanted alarms.
• Surface-mount device (SMD) circuit board design.
• 4-wire system operation.
• Detector auto-reset once gas levels fall below alarm threshold levels.
• Internal reed switch for hush and test functions.
• N/O alarm relay output.
• Easy installation. No programming required.
• Connects to Zone Module for use with addressable control and indicating equipment.
• Sleek low-profile housing design.
• Low maintenance.