Honeywell Products

Product Details:

The HM-MCP-GLASS-ULis an addressable manual break glass call point which, as a simple rotary decade, switch at the rear of the unit for addressing. A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch – enabling a complete functionality test. The HM-MCP-GLASS- UL call point is designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel. Installation efficiency and compliance with the latest standards are at the heart of the call point range.

LED Status:

• The LED status is controlled by the fire panel and shows blinking RED each time the device is polled, or continuous RED to indicate fire detection..

Features & Benefits:

• Innovative “Plug and Play” installation concept
• Analogue addressable communications
• Integral LED

Product Details:

The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings. All in all, a compact, high performance, feature rich, economical fire alarm control panel designed to help both the installer and the end user.The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.
 
The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fire panel on the market to install. Simply fix the control panel to the wall, connect the field wiring, power up and in as few as five button presses you can have a compliant, working fire alarm system. The panel’s large graphical display provides a clear menu structure making the whole initial set-up process quick, clear and intuitive.
 
DXc range Morley-IAS addressable fire alarm control panels are available with large blue LCD display and support user to create 40 to 80 zone alarm with option to upload company logo.  DXc1 (1 Loop fire alarm control panel) , DXc2 (2 Loop fire alarm control panel) and DXc4 (4 Loop fire alarm control panel) addressable fire alarm control panel supports Apollo (Xplore, XP95 and Discovery), Hochiki (ESP) & System Sensor protocol devices.
 
Additionally, programming the control panel couldn’t be easier. Complex configuration can be achieved by using either the panel’s mobile phone style key pad or by using the Windows PC programming tool supplied with the panel. The flexible PC programming tool also allows text messages for devices or zones to be imported from an Excel spread sheet, saving further time.

Product Details:

Morley DXc4 Addressable 4 Loop Fire Alarm Control Panel (Multi-Protocol)

The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fire panel on the market to install. DXc Control panels are supplied without zone LEDs. In order to connect panels together to create a network a DXc Network card and DXc Control panels are supplied without zone LEDs.

Key Features:

• Four Loop Control Panel, 230Vac, 2 sounder circuits.
• Supporting industry leading protocols: Apollo, Hochiki ESP and System Sensor
• Dims 391.5 x 390 x 147 (H x W x D)
• Network up to 16 loops (16x1 loop panels, 8x2 loop panels, 4x4 loop panels or any mix up to max 16 loops)
• True peer-to-peer and fault tolerant network for high system reliability
• BS5839 part 1 compliant network
• Disable all relays
• Easy 5 key-press set-ups
• Large blue LCD display
• Supports USB upload/download
• Alpha-numeric style keypad and navigation keys
• Option to upload a company logo
• 160 zone compact mimic support
• Panel buzzer ‘mute’ in engineering mode
• Up to 72-hour standby

Product Details:

The Morley-IAS Fire Alarm Control panel is ideally suited for use in the protection of small to medium sized buildings. It is a compact, high performance, feature rich, economical fire alarm control panel designed to help both the installer and the end user. The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality. Simply fix the control panel to the wall, connect the field wiring, power up and in as few as five button presses you can have a compliant, working fi re alarm system. The panel’s large graphical display provides a clear menu structure making the whole initial set-up process quick, clear and intuitive.

Features & Benefits:

• Network up to 16 loops (16x1 loop panels, 8x2 loop panels, 4x4 loop panels or any mix up to max 16 loops)
• True peer-to-peer and fault tolerant network for high system reliability
• Optional 40 or 80 zone alarm LEDs
• Easy 5 key-press set-up
• Large blue LCD display

Certifications:

• Certified with BS5839
• Certified with EN6059
• Certified with EN54-2
• Certified with EN54-4
• LPCB approved.

Product Details:

Morley DXc1 Addressable Single Loop Fire Alarm Control Panel (Morley-IAS Protocol)

The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

The Morley-IAS protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fire panel on the market to install. DXc Control panels are supplied without zone LEDs. In order to connect panels together to create a network a DXc Network card and DXc Control panels are supplied without zone LEDs.

Key Features:

• Single Loop Control Panel, 230Vac, 2 sounder circuits.
• Supports the Morley-IAS protocol
• Dims 260 x 390 x 147mm (H x W x D)
• Network up to 16 loops (16×1 loop panels, 8×2 loop panels, 4×4 loop panels or any mix up to max 16 loops)
• True peer-to-peer and fault tolerant network for high system reliability
• BS5839 part 1 compliant network
• Disable all relays
• Easy 5 key-press set-ups
• Large blue LCD display
• Supports USB upload/download
• Alpha-numeric style keypad and navigation keys
• Option to upload a company logo
• 160 zone compact mimic support
• Panel buzzer ‘mute’ in engineering mode
• Up to 72-hour standby

 

Product Details:

The Morley-IAS MI-DCMO control output module is used with the ZX series of intelligent conrol panels to provide either a single alarm circuit or Form C relay. The MI-DCMO can be used to operte dry contacts for door holders, air handling unit shut down or other similar functions. Optionally the module can be used to supervise wiring to the ouput load providing monitoring of the external load voltage or power supply. If the monitored voltage falls below threshold then a fault condition will be indicated. Each MI-DCMO uses one of the ninety-nine possible module addresses available on a loop. It responds to regular polling from the conrtol panel indicated by a pulsing LED every successful communication. On command from the control panel the MI-DCMO will disconnect the supervision and connnect the external power supply across the load. The disconnection of the supervision provides a positive indication to the control panel that the relay is activated. The MI-DCMO has a built-in isolator which may be switched out if required. The MI-DCMO uses a unique mechanical design allowing each module to be mounted either in a wall box (M200-SMB) or on a DIN rail (using M200-DIN). Irrespective of the mounting method chosen, the address switch is both visible and accessible for selection. To help engineers in the maintenance and fault finding process, both the LEDs and the address switches can be viewed without having to remove the cover of the mounting box. The LEDs, being multi colour, provide diagnostic information regarding the status of the output. For ease of installation, testing and maintenance, the field wiring terminals are of a plug in design.

Features:

• DIN rail mounting option
• Surface mounting option
• Tri-colour LED status indication
• Built-in Short Circuit Isolators
• Visible Address selector switches
• LED status visible in 2 planes
• Plug in connectors
• Approved to GEA GEI 1-082 and CEA GEI 1-084

Product Details:

HFC-227ea systems reach extinguishing levels in 10 seconds or less, stopping ordinary combustible, electrical, and flammable liquid fires before they cause significant damage. That’s the fastest fire protection available, period. When fire is extinguished this quickly, it means less damage, lower repair costs, and an extra margin of safety for people. It also means less downtime and disruption of business.

Product Details:

System Sensor waterflow detector WFD20 is suitable for flow detection of Water in sprinklers for fire fighting applications. WFD20 is UL listed, FM Approved, WFD20 can be mounted in horizontal or vertical position.

Product Details:

Boasting a large memory and advanced fingerprint detection function, the compact fingerprint device supports up to 100,000 users (one finger per user). It can also effectively identify common fake fingerprints made from clay, glue, paper and rubber. It supports both low frequency 125kHz and high frequency 13.56MHz cards to meet the needs of different users and scenarios, especially those requiring easy networking and unified management.

Features:

• 1.2GHz quad-core CPU with large capacity memory
• High sensitivity optical sensor
• Advanced fingerprint recognition algorithm, max. 1:150,000 match/sec
• Slender and compact design with brushed metal panel
• Can be installed on narrow mounting surfaces such as glass/aluminium door mullions, turnstiles, etc
• Multi card identification including EM, Mifare and Seos
• Versatile Interfaces: RS-485/TTL/Relay/Wiegand
• TCP/IP network connect
• Multi-Color LED, multi-tone buzzer
• IP67 Protection

Product Details:

The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. 

The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R). 

The HM-FHSE, HM-FHSE-I provides fixed 58°C temperature sensing (Class A1S). These sensors are designed for open area protection and must only be connected to fire panels that use a compatible proprietary communication protocol for monitoring and control. The detectors have two integral red LEDs that provide 360° local visual indication of the device status. 

Features:

• Available with or without short circuit isolation 
• Isolator per device allows faster, more precise fault finding
• Rotary decade addressswitches
• Ivory colour to harmonise with the modern built environment
• Worldwide provedreliability
• Easy to maintain (washable filter)
• Enhanced smoke chamber design to reduce false alarms by dust or contamination
• Fast installation with rotatory addressableswitches (01-99) 
• 2 state LED for 360º indication
• Aesthetic design to harmonise with the modern built environment
• Base complements the detector and is easy to install and wire
• Genuine and fast response
• Advanced protocol and smoothing filter to suppress false alarm
• Analog addressable communication
• Dual integrated LED for 360° visibility
• Conforms to EN54-7
• LPCB approved
• Environment friendly meets RoHS legislative requirement

Product Details:

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of ½”, ¾” and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics’ range of Touchpoint controllers. Contact Honeywell Analytics for details.

Product Details:

Delivering a totally new detector platform, incorporating an advanced digital protocol

The revolutionary HM Series Advanced Protocol range delivers a totally new detector platform that incorporates the new digital Series. The new Protocol delivers more devices on the loop and gives greater control, configurability and device management whilst enabling the overall system to be optimised to the location and use of the building with far greater flexibility than ever before.

All HM Advanced detectors are environmentally friendly and meet the WEEE and RoHS requirements, minimising end of life disposal costs, and are mechanically and electrically backwards compatible with existing Morley devices.

Features And Benefits:

• Available with or without short circuit isolation
• Isolator per device allows faster, more precise fault finding
• Rotary decade address switches
• Ivory colour to harmonise with the modern built environment
• Worldwide proved reliability
• Easy to maintain (washable filter)
• Enhanced smoke chamber design to reduce false alarms by dust or contamination
• Fast installation with rotatory addressable switches (01-159)
• Aesthetic design to harmonise with the modern built environment
• Base complements the detector and is easy to install and wire
• Genuine and fast response
• Advanced protocol and smoothing filter to suppress false alarm
• Analog addressable communication
• Dual integrated LED for 360° visibility
• Conforms to EN54-7
• LPCB approved
• Environment friendly - meets RoHS legislative requirements

Product Details:

The MI-DCZRM addressable zone monitor module allows a zone of nonaddressable devices to communicate with a Morley-IAS protocol analogue addressable system. As a result existing non-addressable zones can be integrated into a Morley-IAS protocol system. The module monitors a zone of two-wire non-addressable devices. Each MIDCZRM uses one of 99 available module addresses on a loop. A fault signal will be transmitted to the panel in case of an open circuit or short circuit on the nonaddressable zone wiring or when the external fault input is pulled low (can be used for power supply monitoring). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations). The non-addressable zone can be powered from the analogue communication loop or from an external power supply. Where the non-addressable zone is powered from an external power supply, the communication loop is fully isolated from the non-addressable zone and from the power supply. The zone monitor module replaces the MI-CZME but can be mounted onto a DIN rail. It can also be powered from the addressable loop and allows integration of non-addressable zones into an addressble system. This module enables non-addressable devices to be monitored by Morley-IAS protocol analogue addressable fire alarm control panels. The maximum recommended number of non-addressable devices that can be used with the MI-DCZRM is 20.

Features:

• Connection of a zone of non-addressable detectors to an analogue addressable fire system
• Built in isolation allowing system installation in stages without loss of protection
• Monitors open circuit and short circuit
• TRI-Colour Status LED
• Zone powered from addressable loop wiring or external 24V PSU
• Remote reset of non-addressable zone
• Compatible with: Most non-addressable detectors IS non-addressable detectors
• Monitoring of external power supply
• External fault input
• CPD approval to EN54-17 and EN54-18, LPCB and VdS
• DIN rail mountable, consistent with all other modules
• Support for an extended power supply range as low as 18Vdc 60mA with an External PSU

Product Details:

The Linear Heat Detection Cable (LHDC) is a continuous heat detector in the form of a cable. It can detect heat at any points along its entire length. The cable is composed of two twisted shield conductors insulated with a heat sensitive polymer, then wrapped with a protective tape and finished with an outer covering. Linear Heat Detection Cable is available in resettable and non-resettable technology. The non-resettable cable is described as Digital and the resettable as Analogue. 800 Series Digital LHD Cable (Non-Resettable) The 800 series is a fixed temperature and non-resettable digital cable. The cable contains insulators which melt at a specific temperature. At the rated temperature, the heat sensitive polymeric insulation creates pressure between conductors, permitting them make contact with each other thereby initiating an alarm signal at the control panel. The LHDC is installed in conjunction with an end-of-line (EOL) device for continuity monitoring and a junction box (optional) for leader wire connection. 900 Series Analogue LHD Cable (Resettable) The 900 series is an analogue heat sensing cable containing insulators of which resistance varies proportionally to changes in temperature. Analogue cable is installed in conjunction with an end-of-line (EOL) device for continuity monitoring and a modulator providing selectable alarm thresholds (programmed before shipping), fire and fault outputs. This cable is self- restorable after the fire event as long as its temperature does not exceed specified resettable temperature limit of 120°C (248°F). Alarm temperature setting ranges between 70°C to 130°C (158°F to 266°F). Customer can specify its own alarm temperature setting. The factory default setting is set at 85°C (185°F).

Features:

• Multiple configurations for installations: - Digital type of LHD cables - Analogue type of LHD cables
• Multiple alarm temperature ratings available for both digital and analogue type
• Maximum zone length (Digital) - 1000 meters
• Maximum zone length (Analogue) – 200 meters
• Resettable temperature up to 120°C (248°F) (Analogue)
• Selectable alarm temperature threshold programmed before shipping (Analogue)
• Normal, fault and alarm indicators on the 900 series modulator (Analogue)
• Compatible with any conventional or intelligent fire alarm panel
• Smoothing algorithms provide false alarm immunity

Product Details:

System Sensor Model BEAM1224 is a four-wire conventional reflected beam smoke detector, which is uniquely suited for protecting open areas with high ceilings, where other methods of smoke detection are difficult to install and maintain. It is to be used with UL Listed compatible control panels only. An advantage of this single-ended reflective design is that it is much easier to install than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a two-digit signal strength meter incorporated into the product. Another advantage of the BEAM1224 is that it is listed for operation in temperatures ranging from –22°F to 131°F. This means it can be used in open areas to provide early warning in environments where temperature extremes may exceed the capability of other types of smoke detectors. BEAM1224 consists of a transmitter/receiver unit and a reflector. When smoke enters the area between the unit and the reflector, the smoke causes a reduction in the signal. When the smoke level reaches the predetermined threshold, an alarm is activated. BEAM1224 has four standard sensitivity selections, along with two Acclimate™ settings (adjustable sensitivity). When one of the two Acclimate settings is selected, the detector will automatically adjust its sensitivity using advanced software algorithms to choose the optimum sensitivity for the specific environment. BEAM1224S is also equipped with an integral sensitivity test feature, which consists of a test filter attached to a servo motor inside the detector optics. When the remote test station RTS451 /RTS151 is used, the motor is activated and moves the filter into the pathway of the light beam, to test the detector’s sensitivity. This integral sensitivity test feature allows the user to quickly and easily meet the S911 3017888 7260-1653:0168 2165 annual maintenance and test requirements of NFPA 72.

Features:

• 16- to 328-foot protection range
• Single-ended, reflective design
• User-friendly alignment procedure
• Six user selectable sensitivity levels
• Optional integral NFPA 72 sensitivity test feature
• Removable plug-in terminal blocks
• Digital display for easy alignment
• Built-in automatic gain control compensates for signal deterioration from dust build-up
• Remote test station option
• Paintable cover
• Easiest alignment in the industry
• Heater kits for transmitter/receiver and reflector option

Product Details:

Key Benefits:

• Reduces even the most critical Electrical Fire risks
• Complete protection from combustion from short circuits, overloading or overheating in an electrical cabinet
• Protects Electrical Panels circuitry
• Avoids work stoppage & business downtime
• Protects business & property assets
• Leaves out no residue & environmental friendly

Product Details:

HN-CL06 is an all-purpose 6W ceiling speaker with an excellent audio performance and aesthetic appealing enclosure.This speaker features a high sound pressure level and a wide frequency response and low distortion for high sound level suitable for speech and music reproductionHN-CL06 has two spring clamps which can be used to easily fix the speaker into the false ceiling.It has three power taps (6/3/1.5W) with the built in 100V transformer.The round metal grille is well fitted in the front

Features:

• Flush-mounting system for fast and easy installation
• Wide frequency response for excellent speech and music reproduction
• Excellent crash and rust resistant design
• Fully ABS plastic with metal grille
• Power tapping options available – 6/3/1.5W

Product Details:

The S200A photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and development. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from ingress of insect and other debris. The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed. The HM-PSE, HM-PSE-S2 has two integral red LEDs that provide 360° local visual indication of the device status. 

Product Details:

The HM-PSE-I Photoelectric Smoke Detectors smoke detector has a completely new detection chamber design, the result of many years of research and development. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris.

The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms.

The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed. The MI-PSE-S2 has two integral tri-colour LEDs that provide 360° local visual indication of the device status. The LEDs are programmable with static or blinking red, amber and green status indications available.

Product Details:

The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R). The HM-FHSE, HM-FHSE-I provides fixed 58°C temperature sensing (Class A1S). These sensors are designed for open area protection and must only be connected to fire panels that use a compatible proprietary communication protocol for monitoring and control. The detectors have two integral red LEDs that provide 360° local visual indication of the device status. 

Product Details:

The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel. The HM-RHSE, HM-RHSE-I provides fixed 58°C and rate-of-rise (10°C / minute) temperature sensing (Class A1R). The HM-FHSE, HM-FHSE-I provides fixed 58°C temperature sensing (Class A1S). These sensors are designed for open area protection and must only be connected to fire panels that use a compatible proprietary communication protocol for monitoring and control. The detectors have two integral red LEDs that provide 360° local visual indication of the device status.

Product Details:

The MI-DMMI and MI-DMM2I monitor modules are used with the Morley-IAS intelligent fire alarm control panels
to provide a single or dual input circuit from external devices.

Features:

• Single or dual inputs
• DIN rail mounting option
• Surface mounting option
• Tri-colour LED status indication
• Built-in short circuit isolators
• Visible address selector switches
• LED status visible in 2 planes
• Plug in connectors
• Approved to GEA GEI 1-082 and CEA GEI 1-084

Product Details:

Addressable Isolator Fixed Temperature Heat Detector, Morley-IAS: HM-FHSE-I provides fixed 58°C temperature sensing (Class A1S). These sensors are designed for open area protection and must only be connected to fire panels that use a compatible proprietary communication protocol for monitoring and control. The detectors have two integral red LEDs that provide 360° local visual indication of the device status.

Product Details:

Key Features:

• Unrivaled Face Recognition Performance
• Best-in-class Multimodal Device
• Contactless Solution for the New Normal
• Ergonomics & User Convenience
• Ambient Lighting Conditions Support- 0 Lux to 75000

Product Details:

Morley-IAS’s new modular range of Intelligent AV warning devices provides easier system confi guration and fl exibility. A common base across AV and detectors is available, allowing for easier installation and ordering.These devices are all available with isolators, providing you with a fl exible approach and allowing for easier fault-fi nding on the loop. please see page 4 for more details.Individual tone and volume settings and sounder tone synchronisation can be adjusted from the panel enabling the sound intensity to be adjusted to suit the application.The common installation base , B501AP is supplied with a shorting spring. This allows for the continuity of wiring to be tested before installing any devices. The Morley-IAS devices can then be fi tted at the fi nal commissioning stage, reducing the risk of damage during the fi rst fi x. At fi nal commissioning the device is simply twisted into the base and the installation is complete. with a shorting spring. This allows for the continuity of wiring to be tested before installing any devices. of wiring to be tested before installing any devices. This system provides a greater degree of fl exibility to system designers, provides a more robust solution and saves time for the installer as all devices are interchangeable without the need to disconnect or disturb the wiring.

Product Details:

The Morley-IAS loop isolator module is used on the Morley-IAS intelligent fire alarm control panels to protect the system against wire-to-wire short circuits on the analogue addressable loop wiring. The fault isolator modules should be placed between groups of sensors on the loop wiring to protect the loop if a short circuit fault occurs. If a short circuit fault occurs, the two isolators located either side of the short circuit fault will automatically sense the voltage drop, open their switches and remove the devices from the rest of the loop. If the line voltage then rises above a fixed threshold, indicating that the short circuit fault is removed, then the isolator module will automatically restore the power to the isolated group of devices. The MI-DISO isolator uses a unique mechanical design allowing each module to be mounted either in a wall box or on a DIN rail. Irrespective of the mounting method chosen, the address switch is both visible and accessible for selection. To help engineers in the maintenance and fault finding process, both the LEDs and the address switches can be viewed without having to remove the cover of the mounting box. The LEDs, being multi colour, provide diagnostic information regarding the status of the isolator.

Features:

• DIN rail mounting option
• Surface mounting option
• Plug in connectors
• Tri-colour LED status indication
• Address selector switches visible in 2 planes
• LED status visible in 2 planes
• Approved to GEA GEI 1-082 and CEA GEI 1-084

Product Details:

Key Features:

• Available with or without short circuit isolation
• Isolator per device allows faster, more precise fault finding
• Rotary decade address switches
• Ivory colour to harmonise with the modern built environment
• Worldwide proved reliability
• Easy to maintain (washable filter)
• Enhanced smoke chamber design to reduce false alarms by dust or contamination
• Fast installation with rotatory addressable switches (01-99)
• 2 state LED for 360º indication
• Aesthetic design to harmonise with the modern built environment
• Base complements the detector and is easy to install and wire
• Genuine and fast response
• Advanced protocol and smoothing filter to suppress false alarm
• Analog addressable communication
• Dual integrated LED for 360° visibility
• Conforms to EN54-7
• LPCB approved
• Environment friendly
• Meets RoHS legislative requirements

Product Details:

This dome device fits into any indoor premises and provides reliable surveillance of its premises with high-quality output, 3D DNR noise reduction and a host of other features.

Features:

• 5 MP, 1/2.8” CMOS sensor
• Up to 30m IR distance
• Excellent low-light performance with 3D noise reduction
• Built-in microphone

Product Details:

View 8 channels simultaneously with synchronised real-time playback from any monitor (Smartphone, tablet or laptop) and from anywhere.

Features:

• Up to 12 MP (4K) resolution live view, preview and playback
• Monitor from anywhere using the mobile app (Apple and Android devices)
• Quick wizard and PoE support for fast and easy setup
• Convenient, flexible storage options: internal HDD, external network storage server, USB