Product Details:
Number of Channels | 2 |
Brand | Crown Harman |
Model Name/Number | CDi 2/300 |
Sensitivity (for full rated power at 8 ohms) | 0.7V RMS |
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) | 19 x 3.5 x 12.25 |
Weight | 14.56 lbs (6.6 kg) |
Damping Factor (20 Hz to 100 Hz) | > 1000 |
Power Supply Connector | Standard IEC type 320 inlet for detachable connector 100 - 240V |
THD (full rated power, 20 Hz - 20 kHz) | 0.35% |
Frequency Response (8, 20 Hz - 20 kHz) | +/-0.5dB |
Crosstalk (below rated power) 20 Hz to 1 kHz | > 80dB |
Input Impedance (nominally balanced, nominally unbalanced) | 20 k balanced, 10 k unblanced |
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms) | > 104dB |
Rated Power Output (per channel @ 4 ohms) | 300W |
DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Black |
Brand | Crown |
Model Name/Number | XTi 1002 |
Sensitivity | 1.4V |
Input Channels | 2 |
Iec Power Connector | 15A |
Weight | 18.5 lbs (8.4 kg) |
Shipping Weight | 21.5 lbs (9.8 kg) |
THD | < 0.5% |
Frequency Response (at 1W, 20 Hz - 20 kHz) | + 0 dB,-1 dB |
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) | 100 dB (A-weighted) |
Dimensions | 3.5" x 19" x 12.25" |
Crosstalk (below rated power) 20 Hz to 1 kHz | >70 dB |
Rated Power Output (per channel) | 700W 2,500W 4,275W 8 |
There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
Features:
Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
New system monitoring provides software visibility of AC line voltage and power supply temperature
Integrated cast-aluminum handles for easy handling and enhanced durability
Locking power cord clip provides a secure connection between the amplifier and power cord
Updated HiQnet System Architect™ control software
Increased number of presets to a total of 50; 49 of which are user definable