Offering you a complete choice of products which include re-737mc analogue addressable control module, re-717mc control module, re-717mm monitor module, re-717mi isolator module, re-737mi analogue addressable isolator module and re-737mm analogue addressable monitor module.
RE-737MC Control Module are the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The output circuit is supervised for faulty condition. The Module addressing is done by soft addressing method through Programming Tool or through the panel.
RE-717MC Control Module is the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The output circuit is supervised for faulty condition.
Special Features:
Indian Manufacturer - International Standard.
UL-Listed (9th Edition).
Modular Construction.
Features:
Supervised a Class ‘B’ Style ‘Y’ output circuit.
Module Status by RED LED.
Analogue Communication with the panel.
Module Addressing by 8 way DIP switches.
Low Standby Current. Available with suitable back boxes.
RE-717MM Monitor Module facilitates third party devices to interface with Ravel make addressable panel. Monitor Module is an input interface device for devices like security contacts, waterflow switches, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The Monitor circuit is supervised for faulty condition.
The Isolator module is an automatic device that isolates a part of the loop by opening when the line voltage drops below 14Volts. These modules should be spaced between groups of sensors or modules in a loop to isolate the faulty area from the rest of the loop. If a short occurs between any two isolators, then both isolators immediately switch to an open state and isolate the devices between them. The remaining units on the loop continue to fully operate. Recommended to connect a maximum of 20 devices to each isolator. The module blinks indicating normal status and a steady glow when activated.
The Isolator module is an automatic device that isolates a part of the loop by opening when the line voltage drops below 14Volts. These modules should be spaced between groups of sensors or modules in a loop to isolate the faulty area from the rest of the loop. If a short occurs between any two isolators, then both isolators immediately switch to an open state and isolate the devices between them. The remaining units on the loop continue to fully operate. A maximum of 20 devices recommended to connect each isolator. The module blinks to normal status and glow steady when activated.
RE-737MM Monitor Module facilitates third party devices to interface with Ravel make addressable panel. Monitor Module is an input interface device for devices like security contacts, waterflow switches, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Monitor circuit is supervised for faulty condition. The module Addressing is done by soft addressing method through Programming tool or through the panel.
Features:
Inbuilt Isolator.
Module Status by RED LED.
Analogue Communication with the panel.
Module Addressing by Software / 8 way DIP switches
Low Standby Current.
Available with suitable back boxes.
Request Callback
Yes! I am Interested
RE-717MZ Analogue Addressable Zone Module
Get Best Quote
Approx. Price: Rs 2,350 / PieceGet Latest Price
Product Details:
Brand
Ravel
Model Name/Number
RE-717MZ
Operating Voltage
24 VDC Nominal.
Weight
0.5 kg
Current Draw(SLC)
0.5mA, (2 mA Max.Latched)
External Supply Voltage
Regulated 24VDC
External Supply Standby Current
5mA
External Supply Alaram Current
60mA Max.
Communication Line Loop Impedance
40 Ohms
End Of Line Resistor
4.7K Ohms.
Dimensions
(95 W X 75 H X 24D) mm
Zone interface module used to connect the conventional smoke,heat and multi sensor detector to addressable fire alarm control panels also the module is used to integrate with Beam detectors to addressable fire alarm system.Shall have RED colored LED for status indications with 8 digit DIP switch for address settings.
Ravel RE - 737MZ zone module permits the addressable FACP to interface and monitor 2-wire conventional smoke detectors, manual call point. The RE-737MZ module is addressed by using the DIP switch to communicate with addressable FACP. It transmits the status (normal, open, short or alarm) of one zone of 2-wire detectors to the FACP. zone module supervises the zone of detectors and the connection of the external power supply.
Features:
Inbuilt Isolator.
Module Status by RED LED.
Analogue Communication with the panel.
Module Addressing by Software / 8 way DIP Switches.
RE-737MR Relay Module facilitates third party devices to interface with Ravel make addressable panel. Relay modules are the remote devices to activate / de-activate any device or instrument or unit using the potential free contacts. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Module addressing is done by soft addressing method through a Programming Tool or through panel.
Features:
Inbuilt Isolator.
Module Status by RED LED.
Analogue Communication with the panel.
Module Addressing by Software / 8 way DIP switches
UL listed control relay module with dual potential free contact to integrate with any third party systems having RED coloured LED for status indications with 8 digit Dip switch for address settings.
RE-717PT is a printer with Interface module connects the serial printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories. RE-717PT printer has a serial interface.
Features:
Ultra small size printer.
Very silent printing thru direct thermal printing method.
High speed(50mm/sec, MAX) High resolution(203dpi : 8dots/mm).
Serial Interface Printer.
Support text and graphic printing.
Easier paper loading by CLAMSHELL design.
Easier maintenance with self-diagnostics.
Flow control : Software (XON/XOFF) Hardware flow control not supported in printer.
RE-737MX input output module is combination of relay module and monitor module. It contains one Form C relay contact allowing the panel to switch the contacts on command and one switch monitor input to monitor the devices like water flow switches, security contacts, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. These modules are addressed by soft addressing method through a programming tool or through the panel. The address setting done by either Manual or Autolearn.This modules requires two addresses, one for relay module and one for monitor module. During addressing the devices, consecutive address should not give to next device after the RE-737MX. 1) Autolearn through FACP. The module automatically assigns first address to Input Section (set address in module) and second consecutive address ( Next address in module) to output section respectively. 2) Manual address setting or via ACS software, first address is assigned to input section & consecutive second address set manually to output section.
Features:
Inbuilt Isolator.
Module Status by RED LED.
Analogue Communication with the panel.
Module Addressing by Software / 8 way DIP switches .
